Buttons On The Handset; Installation; Unpacking And Installing The Phone; Unpacking - Aastra Phone 312 User Manual

Diagram

Buttons on the handset

Softkeys – the function of an individual button is depicted in the display
DE
depending on status. If there are only two possibilities, they are divided
between the left and right softkeys. If there are more possibilities, the softkey
Options will then appear.
F
From the idle state, this button opens the telephone book.
Within a menu or a list, you can scroll up or down using the arrow keys.
r
Signal button/R button: Query button.
H
Speakerphone/hands-free button. Switches the inbuilt loudspeaker on (button
lights up) and off.
B
Info button:
Pressing the button quickly when in the idle state opens the caller list.
The button flashes if new calls have been received in your absence.
C
The C button is used to correct entries. Pressing and holding the button in the
idle state turns the handset on/off.
A
Handset button: Equivalent to "answer" and/or "hang up" on a standard phone.
0 9
Number buttons are used for direct entry of call numbers and names.
...
#
The pound button is used for entering the pound sign.
Pressing and holding the button in idle state: Switches on the key lock.
*
The asterisk button is used for entering the asterisk sign.
Pressing and holding the button in idle state: Switches the ringer (buzzer)
on/off.
All buttons are illuminated.
6

Installation

Unpacking and installing the phone

Unpacking

The packaging contains:
• Aastra Phone 312 handset
• Charging point
• Mains adapter plug (100 - 240V/50 – 60 Hz) with connecting cable (3 m)
• One battery (stuck into the battery cover)
• MEM card (installed or separate depending on the model)
• Belt clip
• Instruction manual (abridged version)

Installing the charging point

Your phone is produced for normal use conditions. Furniture today is coated with a highly-visible
variety of varnishes and plastics and treated with different varnish servicing products. It cannot be
ruled out that some of these products will contain components, which corrode and soften the plastic
feet of the charging point. Device feet, which have been altered in this way by foreign products,
could leave unpleasant marks on the surface of the furniture.
For obvious reasons, the manufacturer cannot be held responsible for this type of damage. There-
fore please use a non-slip mat for your charging point, particularly when it is installed on new furni-
ture, or furniture which has been freshly treated with varnish servicing products.
Note
• Please observe the following:
The AC connection should be within the reach of the cable supplied.
• Please also ensure that the charging point is not installed in the opening area of doors or win-
dows. This could lead to damage.
7