Location Of Controls; Direct Operation - Travis Industries DVS GSR2 NB Owner's Manual

Location of Controls

Direct Operation

The fireplace may be directly operated from the battery holder. The three positions are below (see
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC "remembers" the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see "Mode Controls" on page 31). The thermostat and burner on/off operating functions will not work on
the transmitter.
© Travis Industries
Operation
Most features will be controlled by the included
remote.
Swing the access door and control cover down
to access the battery holder / switch.
4131108
Most features will be
controlled by the
included remote.
Figure 3
27
):
Figure 3
100-01317