KVH Industries Cars 2 Innotab User Manual page 63

TracVision M3/M2 User's Guide
Appendix C - Programming User-Defined Satellites
72
4. Type the following @SATCONFIG command then
press Enter:
@SATCONFIG,X,E,F,G,H,I,J,K
Field Description
X User-defined satellite stored in antenna library
(996W = User A; 997W = User B)
E Frequency, MHz (00000 or 10700-12700)
F Symbol rate, kilosymbols per second (10000-45000)
G FEC code (12, 23, 34, 56, 67, or 78)
H Network ID, hexadecimal (0x####)
I Polarization (V = vertical; H = horizontal)
J LNB down conversion frequency
(L = low; H = high; G = Latin America; S = Sinosat)
K Decoding type (1 = DSS-A; 2 = DSS-B; 3 = DVB)
5. Repeat Step 4 for each polarization/band:
• Vertical High
• Vertical Low
If your selected satellite does not have information for
one or more of these transponder categories, you can
enter the following default values instead:
Transponder Data
Frequency
Symbol rate
FEC code
Network ID
6. Type @DEBUGOFF then press Enter.
7. Type ZAP then press Enter. The antenna restarts. Wait
one minute for system startup.
8. Follow the steps in
page 27 to select your new USER A or USER B satellite.
• Horizontal High
• Horizontal Low
Default Value
00000
27500
Same value as other transponders
with valid data
0x0000
"Selecting Satellites to Track" on