TracVision M3/M2 User's Guide
Chapter 5 - Troubleshooting
Running the Diagnostics Test
42
In addition to the front panel status lights, the interface box includes a
self-test function within its Diagnostics menu. Follow the steps below
to run this test.
1. Press
MENUS until the display shows
"DIAGNOSTICS."
DIAGNOSTICS= NO
NEXT MENU
2. Press
CHANGE until the display shows
"DIAGNOSTICS= YES."
DIAGNOSTICS= YES?
CHANGE
3. Press
ACCEPT to enter the Diagnostics menu.
ENTERING DIAGNOSTICS
SYSTEM RESET= NO
NEXT MENU
CHANGE
ACCEPT
CHANGE