System Status Lights - KVH Industries Cars 2 Innotab User Manual

TracVision M3/M2 User's Guide
Chapter 5 - Troubleshooting

System Status Lights

VOLTAGE Light
40
Three status lights on the front of the receiver indicate the current
status of the system and can help you identify problems.
Figure 15 System Status Lights
Status Lights
During normal operation, all three status lights should be lit green.
The following tables explain what the different light conditions
indicate.
The table below explains what the VOLTAGE light indicates.
Light is... Indicates
Off Off
Green OK
Green, Cable open
flashing
Orange Low power
Red, Bad power
flashing
Description
Interface box is off (power switch is
off) or no power input
Good power (10-16 VDC at interface
box)
Open detected in antenna cable (check
the antenna coax connection)
Low power (9-10 VDC) at interface
box
Insufficient power (less than 9 VDC or
more than 16 VDC input)