TracVision M3/M2 User's Guide
Chapter 5 - Troubleshooting
56
13. Press
MENUS until the display shows the parameter
you want to change. See the table below.
Parameter
FREQUENCY= 12345?
NEXT PARAM
SYMBOL RATE= 12345?
NEXT PARAM
FEC CODE= 5/6?
NEXT PARAM
NETWORK ID= 0x1234?
NEXT PARAM
14. When the display shows the desired parameter, press
CHANGE.
15. Using the
CHANGE and
the parameter to the new setting.
16. Press
MENUS until the display shows "DONE?"
DONE?
NEXT PARAM
17. Press
ACCEPT to save your changes, or press
MENUS to repeat steps 13-16 (to correct a mistake).
Possible Settings
10700-12700 MHz
CHANGE
10000-45000 kilosymbols
per second
CHANGE
1/2, 2/3, 3/4, 5/6, 6/7,
or 7/8
CHANGE
0x0000-0xffff
(hexadecimal)
CHANGE
ACCEPT buttons, change
ACCEPT