Setting The Lnb Skew Angle - KVH Industries Cars 2 Innotab User Manual

TracVision M3/M2 User's Guide
Chapter 4 - Setup
30
9. Repeat steps 7 and 8 for the remaining satellites you
want to install. If you don't need to install four
satellites, select NONE instead.
Once you have selected all four satellites, or you have
selected NONE, the antenna installs the selected
satellite(s) then restarts.
CONFIGURING ANTENNA
RESTARTING ANTENNA
10. Pay close attention to the display during antenna
startup. The display will show the recommended LNB
skew angle setting for your selected satellite(s) and
position. See "System Startup" on page
IMPORTANT!
Be sure to adjust the antenna's LNB to the correct skew
angle, as reported by the interface box during startup. See
"Setting the LNB Skew Angle" on page 31
adjustment instructions.
11. Set up your satellite TV receiver for the same satellites
that you set up in the antenna. See your receiver
owner's manual for details.
IMPORTANT!
Be sure to set up satellites in the receiver in the same order
that you set them up in the antenna. In other words, SAT 1
(or A) in the receiver must be set to the same satellite as
SAT 1 in the antenna, and SAT 2 (or B) in the receiver must
be set to the same satellite as SAT 2 in the antenna.
13.
for skew