2. Press
ACCEPT.
3. Press
CHANGE until the display shows the correct
polarization and band for the desired channel.
POLARIZATION/BAND=HL
CHANGE
There are four possible combinations of polarization/band:
Code
Polarization
HL
Horizontal
HH
Horizontal
VL
Vertical
VH
Vertical
TIP: Polarization and band information for various channels is
available at
www.lyngsat.com
4. Press
ACCEPT.
The antenna switches to the selected satellite and polarization/
band.
NOTE: The antenna remains in manual switching mode until you
change it back to automatic switching. See
Switching Mode" on page
TracVision M3/M2 User's Guide
ACCEPT
Band
Low
High
Low
High
(site not affiliated with KVH).
"Changing the Satellite
49.
Chapter 2 - Operation
17