Source Technologies ST9720 User Manual page 40

d..d
$
This command identifies the data to be printed in the sixth column of the report. This
field allows for a maximum of 19 characters.
Audit Report Field Seven
&SQ&7
d..d
$
This command identifies the data to be printed in the seventh column of the report. This
field allows for a maximum of 12 characters. The data in this field is recorded for the
Audit Report only.
Print and Purge Audit Report
&%SPURGE
x
$
This command prints and purges the Audit Report. All recorded information is deleted.
The optional field can be any combination of the following letters:
T Total Field 4
O Overlay
S Sort by MICR line
C Communicate - send report to host instead of printing - see additional
information below on SPRINT command
For example, the command &%SPURGES$ sorts the records by the MICR line while the
command &%SPURGESO$ sorts the records by the MICR line and prints an overlay
with the data.
Options can be forced on with these commands but they cannot be forced off. In other
words, if the front panel overlay setting is on, it cannot be forced off by a datastream
command. If the front panel overlay setting is off, however, a datastream command can
activate this feature. This command can only be accessed with a valid password
command.
Print Audit Report
&%SPRINT
x
$
Prints the Audit Report
Source Technologies, LLC
Data to be printed
Command terminator
&%SQ7d..d$
Lead in string
Data to be stored
Command terminator
&%SPURGExx$
Lead in string
option(s)
Command terminator
&%SPRINTxx$
Lead in string
option(s)
Command terminator
36 ST9720 Secure MICR Printer User's Guide
Audit Trail Reports | 7