Fujitsu Siemens Computers FGSW-1602 User Manual page 27

Setting display of the OSD menu
Calling the OSD Setup setting window
Setting language for the OSD menu
Language
With this function you select the language for the OSD menu. The following
languages are offered:
English (default setting)
English
Setting the horizontal position of the OSD menu
OSD
H-Position
With this function you move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
OSD
V-Position
With this function you move the OSD menu up or down.
Setting the display duration of the OSD menu
OSD
Timeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Setting functions in the "Advanced " menu
Calling the Advanced setting window
Displaying monitor data
Resolution
Notifier
The optimum resolution for this monitor is 1280 x 1024 pixels. With the function
activated (On), a message appears on the screen after approx. 30 seconds if a
different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality. With the
function deactivated (Off), no message appears.
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the MENU/SEL button to activate the function. The Auto Processing message
is displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
A26361-K1018-Z120-1-7619, edition 1
French
Spanish
Italian
SCALEOVIEW S17-2 / S19-2
Swedish
Dutch
Russian
19