Fujitsu Siemens Computers FGSW-1602 User Manual page 30

SCALEOVIEW S17-2 / S19-2
Having this problem?
Picture is shaking
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances
(horizontal lines, picture noise)
The screen becomes darker
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number of
pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720
pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4 million dots
in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a
total of 25 faulted dots. This corresponds to approx. 0.00062 % of the entire screen surface!
22
Check the following points:
► Check whether the data cable for the monitor
is correctly attached to the monitor port on the
computer.
► Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
► Press the MENU/SEL button to activate the
function Factory Recall. The Auto Processing
message is displayed.
► Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
► Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
The background lighting has a limited lifetime. If
your monitor display should become too dark, the
background lighting will have to be exchanged.
► Please contact our help desk.
A26361-K1018-Z120-1-7619, edition 1