Fujitsu Siemens Computers FGSW-1602 User Manual page 25

All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
Adjusting the brightness and contrast
Calling the Brightness / Contrast setting window.
Brightness Setting the brightness of the display
With this function you change the brightness of the background lighting.
Contrast Setting the contrast of the display
With this function you modify the contrast of bright colour tones.
Auto Level Setting the brightness of the display
With this function you can automatically set the contrast.
Press the MENU/SEL button to activate the function.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
A26361-K1018-Z120-1-7619, edition 1
SCALEOVIEW S17-2 / S19-2
The first function (H-Position) is highlighted.
If necessary, press the 6 or 5 button to
►
mark another function.
► Press the MENU/SEL button to select the
highlighted function.
Press the 6 or 5 button to adjust the value
►
for the selected function.
► Press the AUTO/EXIT button to exit the
function.
If necessary, press the button 6 or 5 to
►
mark another function or press the
AUTO/EXIT button to return to the main
menu.
17