Ducati SuperBike 1098S Use And Maintenance Manual page 29

Clock setting
To set the clock, select the "TIME Set" page from the menu.
From this page, if you hold the button (1, fig. 8) in position B
"▼" for 3 seconds, you go into clock setting mode.
On entering this function, the message "AM" flashes on the
display; if you switch the button (1, fig. 8) to position B "▼",
the message "PM" flashes on the display; if you switch
the button (1, fig. 8) to position B "▼", you return to the
previous step (if the time is 00:00, when you switch from
AM to PM the time 12:00 will appear).
If you switch the button (1, fig. 8), to position A "▲", you
can set the hours, which start flashing. Each time you
press the button into position B "▼", the count advances
cyclically in steps of 1 hour; if you hold the button down in
position B "▼", the count advances cyclically in steps of
1 hour every second (when the button is held down
continuously, the hours do not flash).
If you switch the button (1, fig. 8), to position A "▲", you
can set the minutes, which start flashing. Each time you
press the button into position B "▼", the count advances
cyclically in steps of 1 minute; if you hold the button down
in position B "▼", the count advances cyclically in steps of
1 minute every second. If the button is held in position B
"▼" for more than 5 seconds, the minutes advance by 1
every 100 ms (when the button is held in position B "▼"
continuously, the seconds do not flash).
If you switch the button to position A "▲", the system
exits setting mode and displays the newly set time.
flashing
B
B B
flashing
A
A
flashing
B
setting
A
E
A
flashing
A
setting
B
A
fig. 23
29