General Cleaning - Ducati SuperBike 1098S Use And Maintenance Manual

General cleaning

To preserve the original shine on metal surfaces and
paintwork, wash and clean your motorcycle at regular intervals
depending on the type of use and according to the particular
road conditions. Use specific products, where possible
biodegradable. Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle immediately after use,
as marks can form due to evaporation of the water on hot
surfaces. Never clean the motorcycle using hot or high-
pressure water jets. Cleaning the motorcycle with water
cleaners may lead to seizure or severe failure of front fork,
wheel hub assembly, electric system, front fork seals,
air inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
If parts of the engine are unusually dirty or greasy, use a
degreasing agent, avoiding contact with transmission
components (chain, front and rear sprockets, etc.). Rinse
with warm water and dry all surfaces with chamois leather.
Warning
There may be loss of braking efficiency immediately
after washing the motorcycle. Never grease or lubricate
the brake discs as this would cause loss of braking
effectiveness. Clean the discs with an oil-free solvent.
E
93