General Specifications; Specifications - Jet J-7040 Operating Instructions And Parts Manual

General Specifications

Model Stock Number
J-7020 414472
J-7040 414478
The JET Models J-7020/J-7040 Horizontal Cut-Off
Bandsaws are ruggedly built, precision machines de-
signed for either wet or dry applications. The 2 HP
motor along with the worm gear reduction drive train in

Specifications

Capacity
Speeds
Motor
4
Blade Size
Blade Guides
Blade Wheels
Dimensions
Shipping Weight
Vise
Coolant System
10" Round
10" x 10" Square
9" x 16" Rectangle
100 to 350 feet per minute - variable speed
Model J-7020 1.5 H.P., 1 phase, 110/220V
Model J-7040 - 2 H.P., 3 phase, 220/440V
1" x .035" x 135"
Adjustable 6 point contact combination bearing and carbide
14" diameter, cast iron
Length: 79" / Width: 31" / Height: 41"
Approximately 725 pounds
Rapid acting, 3 jaw design
Recirculating system standard with each machine complete with 1 GPM pump, 8
gallon reservoir, and coolant applied through the blade guides.
an oil bath, transmits smooth and positivepower to the
blade. This drive system coupled with the recirculating
coolant system keeps the blade running cool and true,
which results in longer blade life.