Special Chime; System Tests - GE Simon XT User Manual

28 Simon XT
User Manual

Special chime

To enable or disable the Special Chime feature:
1. Scroll up/down until the display shows Chime.
2. Press Enter. The current setting will flash.
3. Scroll up/down to toggle Special Chime On/Off.
4. Press Enter. The setting will stop flashing.
5. Press STATUS to exit.
An outlined bell icon will appear in the display when Special Chime is enabled.
Note: This menu will not appear if Special Chime sensors are not in your system.

System tests

The Simon XT system tests include:
• Sensor Test (see
• Comm Test (see
• System download
System download
You can initiate a download call to program your system with the settings specified by your installer.
To initiate a download:
1. Scroll up/down till the display shows System Tests.
2. Press Enter. The display shows Enter Code.
3. Enter your master code with numeric keys.
4. Press Enter. The display now shows Sensor Test.
5. Scroll up/down till the display shows System Download.
6. Press Enter. The display shows Download In Progress.
7. Wait while your system calls the download center.
8. Display will show the result of the download. If the display shows Download Fail, contact your dealer.
9. Press STATUS twice to exit.
Note: Use this feature only when instructed by your installer or dealer.
Testing sensors on page 38)
Testing communication on page 39)