Pair Mobile Phone And Call - Plantronics Voyager PRO UC v2 User Manual

Pair mobile phone and call

1
Ensure your headset is fully charged. Press and hold the power button on the headset until the
indicator light flashes red and blue. The headset is now in pairing mode.
NOTE If you don't see the red and blue flash, press and hold the power button to turn your headset
off. Then press and hold the power button again until you see the red and blue flash.
The headset will stay in pairing mode for ten minutes.
2
Activate the Bluetooth feature on your phone, then use the phone's settings to add/search/
discover new Bluetooth devices.
BlackBerry® Settings/options > Bluetooth: On > Search for devices.
iPhone Settings > General > Bluetooth > On (starts the search for devices)
Android Phone Settings > Wireless > Bluetooth: On > Scan for devices.
Other Consult phone manual
NOTE For detailed paring instructions for popular mobile phones visit
plantronics.com/easytopair
PLT_VoyagerPRO
3
Some phones may request that you enter a password for pairing. Enter
phone requests a password to pair with the headset. Headset LED will stop flashing and exit
pairing mode when your headset and phone are successfully paired.
PLT_VoyagerPRO
TIP For pairing tutorial visit:
4
Make a test call from your mobile phone.
5
End the call by pressing the headset's call button. The call does not end if you remove your
headset without pressing the call button. See
plantronics.com/easytopair
Smart
0000 password if your
Sensors.
13