Contents Welcome Featured highlights ™ System Requirements for Plantronics Spokes Software What's in the box Overview Headset Bluetooth USB Adapter The Basics Call Controls Mute Adjust the volume Use Smart Sensors Play or pause streaming audio Pair phone or tablet...
Welcome Congratulations on purchasing your new Plantronics Voyager Legend UC wireless headset system. This user guide contains instructions for setting up and using your Voyager Legend Bluetooth Headset and BT300 Bluetooth USB Adapter. Featured highlights • Auto Answer calls by placing headset on your ear.
What's in the box Foam eartip covers and Voyager Legend Bluetooth Headset Bluetooth USB Adapter silicone eartips Micro USB charge cable with headset charge Portable charge case adapter Desktop charge stand AC charger...
The Basics voice Call Controls Answer a call Choose: • Tap the Call button • Put headset on (Smart Sensor) • Say "answer" when prompted (mobile phone only) Answer a second call Choose: • Tap the Call button to end current call, then tap the Call button again to answer the second call.
“mute off”. NOTE The mute off voice prompt and mute reminder timing can be customized in MyHeadset Updater. plantronics.com/myheadset Adjust the volume Toggle the Volume button up (+) or down (–) during a call or while streaming audio.
Pair phone or tablet Pair your headset to your phone or another device, such as a tablet. Switch on your headset then choose: • Tap the Voice button and say “Pair mode,” or • Press and hold the Call button until you hear “Pairing”...
Your headset tells you about status changes with a U.S. English accent. You can change the ™ voice alert language by visiting plantronics.com/myheadset and downloading the MyHeadset Updater tool. The available languages are Cantonese, English with a U.K. accent, Danish, French, German, Italian, Japanese, Korean, Mandarin, Norwegian, Russian, Spanish and Swedish.
I say?” tells you the full list of available commands. You can change the voice command ™ language by visiting plantronics.com/myheadset and downloading the MyHeadset Updater tool. The available languages are English with a U.S. accent, English with a U.K. accent, French, German, Italian, Japanese, Korean, Mandarin, Russian, Spanish and Swedish.
Change the eartip Change the eartip for a better fit. Push in eartip and rotate to the left to unlock it. Align new eartip into slot. Push and rotate it to the right to lock it into place. Wear on the left or right To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the other side before lowering the boom.
Charge There are three ways to charge your headset. Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge it at any time. NOTE Always charge at near room temperatures; never charge battery at temperatures below 0°C (32°F) or above 40°C (104°F).
Understand the charge case lights The indicator lights flash battery status for the charging case and the headset . • 3 red flashes = battery critical • 2 red flashes = battery low • 2 blue flashes = battery medium •...
Low Battery Warnings Battery Level Tone Voice Prompt 30 minutes of talk time Double high tone every 15 "Battery Low" repeats every 30 remaining (this alert only occurs minutes minutes during an active call) 10 minutes of talk time Triple high tone every 30 "Recharge Headset"...
Pairing your Bluetooth USB Adapter Initial Pairing Your Bluetooth USB adapter comes pre-paired to your Voyager Legend headset. Re-Pair USB Adapter to In the event that your headset and Bluetooth USB adapter are not paired or become unpaired headset do the following: Remove the Bluetooth USB adapter.
PC Audio Setup for Windows XP Go to Control Panel -> Sounds and Audio Devices, and in the Audio tab set the Plantronics BT300 as the default device for the Sound playback and Sound recording sections. Place a call from your computer softphone. During an active call, the Bluetooth USB adapter will flash blue.
™ MyHeadset Updater (plantronics.com/myheadset) tool enables you to: • Receive firmware updates • Change language for voice alerts and commands (English with a U.K. accent, English with a U.S. accent, French, and German, Spanish). Voice alerts are also available in Cantonese and Mandarin.)