Placing A Call With Your Headset And Bluetooth Mobile Phone; Answering And Ending Calls With Your Headset And Bluetooth Mobile Phone; Call Button Behavior With Pc And Mobile Connected (Not On A Call) - Plantronics Voyager PRO UC v2 User Manual

Placing a call with your headset and Bluetooth mobile phone

To place a call
Redial last number*
Activate voice dialling*
* Only available on mobile phones that support these features.

Answering and ending calls with your headset and Bluetooth mobile phone

To answer a call
To answer a call when already
on an active Microsoft Office
Communicator call
To end a call
Redial last number*
Reject a call
Transfer a call from your
mobile phone to your headset
Transfer a call from your
headset to your mobile phone
* Only available on mobile phones that support this feature.
Call button behaviour with PC and mobile connected (not on a call)
Open a computer audio
connection
Redials last number on
mobile phone
Starts voice dialling on
mobile phone
Dial number on your mobile phone keypad.
Double press call button. There will be a double low tone on each press.
A final tone indicates the last number has been redialled.
Press and hold call button for two seconds. First tone on key press start,
followed by a second tone which indicates voice dial is activated.
Short press call button.
Short press the call button to end the Microsoft Office Communicator
call, then press again to answer your mobile phone call.
Short press call button.
Double press call button. There will be a double low tone on each press.
A final tone indicates the last number has been redialled.
Press call button for one second until you hear a single low tone.
While on a call, press the call button for one second until you hear a
single tone followed by double low tones.
While on a call, press the call button for one second until you hear a
single tone followed by double low tones.
Single tap
Double tap
Hold call button for 2 seconds
14