Connect And Pair; Connect To Pc; Configure Usb Adapter; Pair To Mobile Device - Plantronics Voyager Focus UC User Manual

Connect and pair

Connect to PC

Configure USB adapter

Pair to mobile device

Your Bluetooth USB adapter comes pre-paired to your headset.
1 Insert the Bluetooth USB adapter into your laptop or PC.
2 Pairing is successful when you hear "pairing successful" and the USB adapter LED is solid blue.
3 OPTIONAL: Headset call control
Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute)
functionality.
NOTE
Plantronics Hub software also allows you to customize your headset's behavior through
advanced settings and options.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music,
you will need to configure your Bluetooth USB adapter.
Windows
1 To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
> Playback tab. Select Plantronics BT600,
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
2
Communications tab and select the desired parameter.
Mac
3 To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On
both the Input and Output tabs, select
1 To put your headset in pair mode, press and hold the power button towards the Bluetooth icon
until you hear "pairing" and the headset LEDs flash red and blue.
2 Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
NOTE
*Menus may vary by device.
3 Select "PLT_Focus."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Some softphones require the installation of Plantronics Hub for
set it as the Default Device and click OK.
Plantronics BT600.
5