Headset Controls, Indicators And Voice Prompts - Plantronics Voyager PRO UC v2 User Manual

Headset controls, indicators and voice prompts

Action
Power on/off Press power on/
off button
2 seconds
Check if headset is Short press
powered on call button or
volume + or -
button
Incoming call alert None
Call answer/end Short press call
button
Adjust the listen Short press
volume (during a volume +
call) or - button
Call indicator light With headset
(enable/disable) powered on,
press power,
volume +
and - buttons
simultaneously
for
1 second
Reconnect after Short press call
leaving range for button
more than 30
seconds
Indicator light Tone
On: solid blue for On: ascending
2 seconds tone
Off: solid red for Off: descending
2 seconds tone
Short blue flash None
Flashes blue Three single low
tones
Short blue flash Single low tone
followed by low-
low-high tones
Single blue flash Tone at each
change in volume.
Double tone when
min/max volume
level reached
Turn indicator on: Single low tone
blue glow increases
for 2 seconds
Turn indicator off:
blue glow
fades for 2 seconds
Single blue flash Single low tone
Voice prompt
On: "Power on"
followed by a voice
prompt detailing
battery status.
Off: "Power off"
"Volume minimum"
"Volume maximum" at
the limits of the range
"PC connected"
"Phone 1 connected"
"Phone 2 connected"
"Connected" depending
on the device
configuration.
17