Table of Contents
Advertisement
Power, pair and charge
Power on the case
Pair first time
Pair mode
Charge
Your charge case is shipped from the factory in a Deepsleep mode to conserve battery. Power on
your charge case to power your earbuds for first use.
Click and hold the charge case button for two seconds to power it on.
The charge case LEDs light up.
:02
The first time you take your earbuds out of the charge case, the pairing process begins.
Take the earbuds out of the case. The LED, located on the right earbud, flashes red and white to
1
indicate pairing mode.
Activate Bluetooth
on your phone and set it to search for new devices.
®
2
•
iPhone
Settings > Bluetooth > On*
•
Android
™
Settings > Bluetooth: On > Scan for devices*
NOTE
* Menus may vary by device.
Select "PLT BBFIT31XX Series."
3
Once successfully paired, you hear "pairing successful" and the earbud LED stops flashing.
With the headset powered off, click and hold the right earbud until you hear "pairing."
R
To charge your earbuds, place them in the charge case. Charge the case by plugging it into a
computer or USB charging device. For fastest charging, plug them into a wall charger.
4
Advertisement
Table of Contents
