Changing The Relative Humidity Setpoint - Uponor Climate Control User Manual

Section 9 –

Changing the Relative Humidity Setpoint

The relative humidity setpoint is the target for the
relative humidity in the zone the thermostat is controlling
or monitoring. To change the relative humidity setpoint,
use the following procedure.
1. Press the cycle button four times or until the
display shows the relative humidity icon.
2. Press the (+) button to increase the relative
humidity setpoint by 1% increments; press the
(–) button to decrease the relative humidity
setpoint by 1% increments.
Uponor Climate Co ˘ ntrol™ Network System Thermostat User Manual
Note: The Climate Co ˘ ntrol™ Network System will
automatically limit the range for the humidity
setpoint based on the outdoor temperature. This
control will prevent the area from becoming too
moist (which can cause condensation on windows,
ceilings, etc.) or too dry (which can cause drywall
cracking, wood flooring shrinkage, etc.)
19