Removal and Replacement Procedures
The Removal and Replacement Procedures for the CD–ROM Drive follow.
CAUTION: Electrostatic charges can damage the integrated circuits on printed
circuit boards. To prevent such damage from occurring, follow
proper ESD precautions
Field Replaceable Units
The following components are authorized for field replacement.
Before performing the Removal and Replacement Procedures, observe the following
Please refer to your system's Owner's Guide for the procedures to power off the
Unplug the system unit power cord and the power cords of any peripheral devices
from the power source.
Unplug the system unit power cord from the back of the system unit.
WARNING: Failure to properly shut down and remove power from the system
may create a personal hazard, or may result in hardware damage or
Removing and Replacing the CD–ROM Drive
To open your system, remove and reinstall the CD–ROM drive, refer to your system
Owners Guide. Pre–installation information is found in Chapter 1 of this document.