A screen similar to the following appears:
H/W Path
====================================
1.0.0
2.0.1
2.0.1.2.0
2.0.2
2.0.3
2.0.4
2.0.5
2.0.6
2.0.7
2.0.7.6.0
Look under the H/W Path heading for device paths beginning with the sequence 2.0.1.
The sequence 2.0.1 denotes single–ended scsi controller. The number following 2.0.1 is
the address setting for a single–ended device on that controller. For example, the listing
2.0.1.2.0 in the sample device list tells us that there is a single–ended device currently
using address 2.
3–4
Description
Status
graphics
ok(0x577)
scsi
ok(0x7071)
disk
ok(0x202)
lan
ok(0x7072)
hil
ok(0x7073)
serial
ok(0x7075)
serial
ok(0x7075)
parallel
ok(0x7074)
scsi
ok(0x707c)
disk
ok(0x101)