Download  Print this page

Removal And Replacement Procedures; Field Replaceable Units; Removing And Replacing The Cd-Rom Drive - HP Model 705 - Workstation User Manual

Hp 12x speed cd-rom disk drive user's guide (a1658-90703)
Hide thumbs

Advertisement

Table of Contents

Removal and Replacement Procedures

The Removal and replacement procedures for the CD-ROM Drive follow.
CAUTION: Electrostatic charges can damage the integrated circuits on printed cir-
cuit boards. To prevent such damage from occurring, follow proper
ESD precautions

Field Replaceable Units

The following component is authorized for field replacement.
Description
CD-ROM Drive
Before performing the Removal and replacement procedures, observe the following
precautions:
1.
Please refer to the system Owner's Guide for the procedures to power off the system.
2.
Unplug the system unit power cord and the power cords of any peripheral devices from
the power source.
3.
Unplug the system unit power cord from the back of the system unit.
WARNING: Failure to properly shut down and remove power from the system may
create a personal hazard, or may result in hardware damage or data
corruption.

Removing and Replacing the CD-ROM Drive

To open your system and remove and reinstall the CD-ROM drive, refer to the system
Owner's Guide. Pre-installation information appears in Chapter 1 of this document.
3–12
Part Number
A4xxx–60001

Advertisement

Table of Contents
loading

  Also See for HP Model 705 - Workstation

  Related Manuals for HP Model 705 - Workstation