3-9) View Event Log Menu Function And Setting Method - Samsung SSC21WEB User Manual

10. A window will appear for rebooting after completing all the update processes.
Click the reboot button and press the confirmation button to reboot the system.
11. Close your web browser and wait for about a minute before you log in again
Files relate to the update of SSC21WEB
Kernel Image zimage
RAM Disk Image rfs.gz
System Image Fw_2pq.tar.gz
Web page Image web.tar.gz
The window shown as above may not appear if there is a pop-up breaker installed in the
user's PC. If you update system on a web page, you should stop the pop-up breaker to
proceed.
* Note :
Download a picture at http://www.securitysamsung.com
Refer to Appendix A (page 96).
Eng-84

3-9) VIEW EVENT LOG MENU function and setting method

• Function: Displays the time and date of camera event and type of event.
Setting method:Move to #7. VIEW EVENT LOG MENU by using œ œ ENTER√ √
•
SWITCH at SETUP MENU, then press the ENTER SWITCH to display the OSD as
shown in the figure below. (The figure shows the initial setting status.)
06/01/03
NO CH MM/DD/YY
Sequence of
01 07 02/10/03
02 01 02/11/03
event happening
03 01 06/01/03
04 02 06/01/03
Camera No.
05 01 --/--/--
06 01 --/--/--
that event
07 01 --/--/--
happened.
08 01 --/--/--
Date of event
happening
An event which occurred most recently is recorded with first priority, then users can move to
the next page by using œ œ ENTER√ √ SWITCH. A Total of 64 events can be listed.
* Note :
IF you press the FREEZE key and the SEQUENCE key at the same time, all event
lists will be erased.
Eng-85
13:14:00
HH:MM:SS EVT
Type of event happening
10:00:30 A
L : LOSS
11:22:00 L
A : ALARM
12:33:01 -
13:01:03 -
Time of event hap-
--:--:-- -
pening
--:--:-- -
--:--:-- -
--:--:-- -