Loading A Disk Into The Drive - HP StorageWorks 1900ux User Manual

Loading a disk into the drive

Note:
packages require that you load and eject disks by using instructions in the software. If
you use a software application to manage files in the jukebox, check the software
documentation before proceeding with these steps.
1. Start with READY, or LOAD *displaying on the control panel.
2. Load UDO media into the drive by inserting the disk gently but firmly into the
Figure 5: Loading media
3. LOAD SLOT # will display, with # flashing to indicate the number of the
4. LOADING displays as the jukebox moves the disk to a slot. After the disk is
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User's Guide
Label all disks before loading them into the jukebox. Some application software
mailslot, shutter end first, and with the side you want to access facing up (A or
B). See Figure 5.
An incorrectly inserted disk will be rejected with CART IN WRONG
displaying briefly.
first available storage slot in the jukebox. To select this storage slot number,
press LOAD or ENTER. To choose a different storage slot, press NEXT or
PREV until the desired slot number displays, and then press ENTER.
loaded into the storage slot, LOAD * displays. You can now load additional
disks by inserting them into the mailslot and repeating
finished loading disks.
Operations
step 3 until you are
21