Control Panel Operations; Ejecting A Disk - HP StorageWorks 1900ux User Manual

Control panel operations

The following operations can be performed from the jukebox control panel:
Note:
page 21.

Ejecting a disk

Note:
following the instructions in the software. If you use application software to manage
files in the jukebox, check the software documentation before proceeding with these
steps.
1. With READY displaying on the control panel, press NEXT until EJECT *
2. EJECT SLOT # displays, with the "#" flashing to indicate the first storage
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User's Guide
Ejecting a disk, page 33
Entering the administration menu
Changing the administration menu
Viewing the current SCSI
Configuring the jukebox, page 37
Setting an operating
Retrieving log history, page 40
Running an internal
For information on loading a disk, see
Some application software packages require that you load and eject disks by
displays, and then press ENTER.
slot in the jukebox that contains a disk.
To select the storage slot number that shows in the display, press
ENTER.
To choose a different storage slot, press NEXT or PREV until the desired
slot number displays, and then press ENTER.
EJECTING displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.
password, page 34
password, page 35
IDs, page 36
configuration, page 39
test, page 44
"Loading a disk into the
Navigation
drive" on
33