Entering The Administration Menu Password - HP StorageWorks 1900ux User Manual

Navigation
3. Remove the disk from the mailslot.
Note:
EJECT *.
4. Press CANCEL to return to the READY state.

Entering the administration menu password

READY
A nine digit numeric password is required to access menu choices beneath the
ADMIN* menu of the jukebox. The jukebox ships with a factory default password
setting of 000 000 000.
Note:
menu
To access administration menu options using the factory default password:
1. With READY displaying on the control panel, press NEXT until ADMIN*
2. Press ENTER. PSWD 000 000 000 displays and the first set of three zeros
3. Press NEXT or PREV until the first number of your password displays and
4. Press NEXT or PREV until the second number of your password displays
34
You can now eject additional disks by pressing ENTER and then following
step 1 through step 3
When the last disk is ejected, EMPTY displays briefly before returning to
> ADMIN*
To change the administration menu password, see
password" on page 35.
displays.
flashes.
If the default password 000 000 000 is still in effect, you can accept this
password by pressing ENTER three times (once for each set of three
zeros). TEST* displays, indicating that the password was accepted. You
are now in the menu tree below ADMIN*.
If you have already changed the password from the factory setting, then
continue with the following steps.
then press ENTER. The middle set of three zeros flashes.
and then press ENTER. The third set of three zeros flashes.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User's Guide
until you are finished ejecting the disks.
> PSWD 000 000 000
"Changing the administration