Honda BF200A Owner's Manual page 75

If water is present in the fuel filter,
refer to fuel filter replacement
procedure (p. 73) to remove the
strainer cup and empty the water from
the inside of the cup. Then drain the
water as follows:
CLAMP DRAIN HOSE
DRAIN SCREW
1. Remove the drain hose from the
clamp on the cylinder head cover
and place the tip of the hose into a
suitable container.
2. Loosen the drain screw with a flat
tip screwdriver.
SERVICING YOUR OUTBOARD MOTOR
3. Squeeze the priming bulb (p. 37) to
force water out of the drain hose.
Stop squeezing the priming bulb
when gasoline starts to flow. 
(Five time may be required to drain
the water.)
4. When the gasoline stops flowing,
tighten the drain screw and secure
the drain hose in the clamp on the
cylinder head cover.
5. Check for fuel leaks while
squeezing the priming bulb.
<Replacement>
STRAINER ASSEMBLY
FUEL FILTER SUSPENSION
BRACKET STRAP
1. Remove the strainer assembly. If it
is difficult to remove the strainer
assembly by yourself, consult an
authorized Honda Marine dealer.
Remove the suspension strap from
the fuel filter bracket, and then
remove the strap from the fuel filter
assembly.
73