Stopping The Engine; Emergency Engine Stopping - Honda BF200A Owner's Manual

OPERATION
During the warm-up period, check
the oil pressure indicator (p. 31),
overheat indicator (p. 31), and
cooling system indicator (p. 32).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS on 
p. 89.
6. If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
46

STOPPING THE ENGINE

Emergency Engine Stopping

Side-Mount Type
EMERGENCY
EMERGENCY
STOP SWITCH
STOP SWITCH
LANYARD
EMERGENCY
STOP SWITCH
CLIP
Panel-Mount/Top-Mount Types
EMERGENCY
CONTROL PANEL
STOP SWITCH
EMERGENCY
STOP SWITCH
LANYARD
PULL
EMERGENCY STOP
SWITCH CLIP
To stop the engine in an emergency,
pull the emergency stop switch clip
out of the emergency stop switch by
pulling the emergency stop switch
lanyard.
We suggest that you stop the engine
this way occasionally to verify that
the engine and emergency stop switch
are operating properly.
PULL