Standard Warning Statements; General Safety Warnings - Cisco 4451-X Hardware Installation Manual

Preparing for Router Installation
This document provides preinstallation information, such as recommendations and requirements that
should be before installing your router. See the following sections to prepare for installation:
•
•
•
•
•
•
•
To see translated warnings that appear in this publication, see the
Information for the Cisco 4451-X Integrated Services Routers

Standard Warning Statements

This section describes the warning definition and then lists core safety warnings grouped by topic.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Note: SAVE THESE INSTRUCTIONS
Statement 1071

General Safety Warnings

Read the installation instructions before you connect the system to its power source. Statement 1004
Warning
OL-27644-01
Safety Recommendations, page 2-5
General Site Requirements, page 2-7
Rack Requirements, page 2-9
Router Environmental Requirements, page 2-10
Network Cabling Specifications, page 2-11
Installation Checklist, page 2-16
Creating a Site Log, page 2-17
C H A P T E R
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
2
Regulatory Compliance and Safety
document.
2-1