Connecting Power - Cisco 4451-X Hardware Installation Manual

Chapter 3 Installing and Connecting the Router
Figure 3-7
Connect the other end of the ground wire to a known reliable earth ground point at your site.
Step 4

Connecting Power

This section explains how to connect AC power to Cisco ISR 4451-Xs.
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Note The installation must comply with all required electrical codes applicable at the installation site.
OL-27644-01
Chassis Ground Connection on the Cisco ISR 4451-X Chassis
Cisco 4400 Series Hardware Installation Guide

Connecting Power

3-12