Led Status - Paradyne 6381 Installation Instructions Manual

LED Status

The Hotwire ADSL/R Bridge/Router's front panel includes LEDs (light-emitting diodes)
that provide status on the router and its interfaces. In
Condition in BOLD shows how the LED should appear after a successful power-on
self-test.
ADSL/R
Table 1. Front Panel LEDs
LED Condition Status
PWR ON
ALM ON
OFF
TST ON
OFF
LINE ON
OFF
TX/RX Blinking
OFF
ETHERNET ON
OFF
PWR ALM TST
The router has power.
An alarm condition exists.
No alarms have been detected by the router.
A service provider-initiated test is in progress.
No tests are active.
The DSL link is established.
No DSL link has been established.
Data transmission is in progress on the DSL line.
No data is being transmitted or received by the router.
The Ethernet connection is active.
No Ethernet device is detected.
Table 1, Front Panel
LINE TX/RX
7
LEDs, the
ETHERNET
03-17357