1. Manuals
  2. Brands
  3. Paradyne Manuals
  4. Network Router
  5. Hotwire 6351
  6. Installation instructions manual

Paradyne 6351 Installation Instructions Manual

Zhone 6351: install guide
Hide thumbs Also See for 6351:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Instruction and Installation Manual
®
Hotwire
6351 ReachDSL
Installation Instructions
Document Number 6351-A2-GN10-00
March 2001
Contents
......................................................................................................
..................................................................................................

Hotwire 6351 ReachDSL Router Overview

®
The Hotwire
6351 ReachDSL
System that interoperates with Hotwire 8312 and 8314 ReachDSL cards in the Digital
Subscriber Line Access Multiplexer (DSLAM) system.
The ReachDSL Router operates as an IP router, connecting a DSL link to an Ethernet
network to provide high-speed Internet or corporate LAN access over traditional
twisted-pair copper telephone wiring. ReachDSL technology operates over existing
copper wire with existing telephone jacks to provide adaptive data rates, and to
dynamically adapt and allocate bandwidth to optimize applications.
.....................................................................
.........................................................................................
.............................................................................................
...................................................................................... 10
................................................................................ 11
............................................................................... 14
........................................................................ 16
........................................................................... 18
™
Router is a component in the Hotwire ReachDSL
™
Router
...................................................
.................................................................
.............................................
.................................................. 16
1
...................................... 20
1
3
4
4
5
7
8
9

Advertisement

Table of Contents
loading

Related Manuals for Paradyne 6351

Summary of Contents for Paradyne 6351

  • Page 1: Table Of Contents

    System that interoperates with Hotwire 8312 and 8314 ReachDSL cards in the Digital Subscriber Line Access Multiplexer (DSLAM) system. The ReachDSL Router operates as an IP router, connecting a DSL link to an Ethernet network to provide high-speed Internet or corporate LAN access over traditional twisted-pair copper telephone wiring.

  • Page 2: Hotwire Reachdsl System

    Standard phone wiring is used for connection to the router. For optimum performance, if the wiring for the router is also used for voice (POTS), a phone filter should be installed on each voice line with a phone, modem, fax machine, or other telecommunications device attached.

  • Page 3: Product Documentation Online

    6035 RJ11 Phone Filter Wall Jack If installing the router on the wall instead of a table or desk, refer to Placement on page 14 before installing the router and cables. Product Documentation Online Complete documentation for this product is available at www.paradyne.com.

  • Page 4: Package Checklist

    Refer to Installing the Hotwire 6351 ReachDSL Router Optional Cable and Adapters The Hotwire 6351 ReachDSL Router is typically configured remotely by the service provider. The following optional cable and adapters are only used when configuring the router locally: Console cable: Straight-through cable with 8-pin non-keyed modular plugs (Part No.

  • Page 5: Installing The Hotwire 6351 Reachdsl Router

    Installing the Hotwire 6351 ReachDSL Router Place the ReachDSL Router on a flat surface, with clearance for the rear connectors. For router cable pin assignments, refer to Procedure 1. Use the supplied RJ11 6-pin cable for the DSL connection. Insert one end of the cable into the jack labeled DSL.
  • Page 6 VT100 terminal or a PC running a terminal emulation program. It is an optional connection that is only used for local configuration of the router. To set up the VT100 terminal or PC for local configuration and to access the router, Configuration Setup refer to Connect the DB9 adapter to the PC and connect the cable to a PC or laptop.

  • Page 7: Power-On

    Power-On When power is applied, the router performs self-diagnostics and the PWR LED is on. The self-diagnostics include a power-on self-test. During the power-on self-test, all of the LEDs turn on for one second.

  • Page 8: Status Leds

    The DSL link is active and ready to transmit and receive data. No DSL link has been established. Data transmission is in progress on the DSL line. No data is being transmitted or received by the router. The Ethernet connection is active. No Ethernet device is detected.

  • Page 9: Troubleshooting

    PWR LED is off. TST LED is on. Action If the LEDs remain on for more than ten minutes, the router is not functional. Contact the service provider. The power-on self-test may have failed. Unplug the router and reapply power. If the alarm LED is still on, contact the service provider.

  • Page 10: Configuration Setup

    Stop bits is set to 1. Flow control is set to Off or None. Accessing the Router When the local console connection is first established, access control to the DSL router displays an initial prompt of Login>. Procedure 1. At the initial prompt of Login>, enter the factory default Login ID of paradyne.

  • Page 11: Cables And Connectors

    Cables and Connectors Installing the Hotwire 6351 ReachDSL Router Refer to details. Use a CAT3, or better, cable for the DSL line. The DSL interface uses a 6-pin, non-keyed modular plug. RJ11 6-Pin Connector Pin # Function 1 & 2 Not used...
  • Page 12 The Console connector uses 8-pin non-keyed modular plugs and a DB9 adapter. RJ45 8-Pin Connector Pin # Circuit Not used Signal Ground Signal Ground Not used 8-Pin Modular-to-DB9 Adapter Plug Modular Pin # Circuit 4 & 5 Signal Ground Console Port Direction Cable —...
  • Page 13 The Ethernet interface connector uses an 8-pin, non-keyed modular plug. Use shielded twisted-pair CAT5 or better cables. — To connect to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Connection Pin # Function 10/100BaseT TX D+ 10/100BaseT TX D– 10/100BaseT RX D+ 4 &...

  • Page 14: Optional Wall Placement

    Optional Wall Placement The Hotwire 6351 ReachDSL Router is designed for tabletop placement. The router can also be mounted on a wall. To mount the router, you will need: Three #6 pan-head screws with anchors (e.g., molly bolts, plastic or lead anchors)
  • Page 15 ReachDSL Router Hardware Template 5.43" Front (LEDs) 7.55" To Bottom Hole 98-16171...

  • Page 16: Reachdsl Router Technical Specifications

    ReachDSL Router Technical Specifications Item Height x Width x Depth Weight External Power Supply Class 2 Transformer normal service input voltage range Unit Power Consumption Approvals FCC Part 15 CISPR 22 Safety Certifications Physical Environment Operating temperature Storage temperature Relative humidity...
  • Page 17 4. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel. 5. General purpose cables are used with this product for connection to the network. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer.

  • Page 18: Government Requirements

    This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: Trade Name: Hotwire Model Number: 6351-A3-200 Warranty, Sales, Service, and Training...
  • Page 19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 20: Warranty, Sales, Service, And Training Information

    Hotwire and MVL are registered trademarks of Paradyne Corporation. ReachDSL is a trademark of Paradyne Corporation. All other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners.   "   Copyright © 2001 Paradyne Corporation. Printed in U.S.A. *6351-A2-GN10-00*...

This manual is also suitable for:

Hotwire reachdsl 6351

Table of Contents