Load Io Config; Delete Io Config; Rename Io Config - Omnia ONE Installation And Operation Manual

character is found, click. This will return the cursor to "select" mode and you can again turn the
knob to select the next character to edit.
-To delete a character... Select the character to be deleted, click, choose the " < " symbol and click
again to delete that character. Characters can only be deleted one at a time.
-To insert a character between 2 existing characters... Select the character just after where the new
character is to be inserted, click, choose the " ^ " symbol and click again. The new character
appears. Now rotate the knob to select the desired character for it and click to accept. (Note that
this inserts a new character before the one selected, and keeps the originally selected character
intact as what it was before choosing "^")
When you are finished, simply rotate the knob clockwise with the cursor in "select" mode until the
Save button is highlighted and click to save the configuration preset.
-To cancel at any time without saving... With the cursor in "select" mode, rotate the knob
clockwise until Cancel is highlighted and click.

Load IO Config

This option allows you to select and load a previously saved IO configuration.
To load a saved IO configuration, highlight Load IO Config and click.
Rotate the jog wheel until the desired IO configuration is displayed and click.
To exit without loading a configuration, rotate the jog wheel until *cancel* is displayed and click.

Delete IO Config

This option allows a previously saved IO configuration to be deleted.
To delete an IO configuration highlight Delete IO Config and click.
Rotate the jog wheel to display the IO configuration to be deleted.
Click the jog wheel and that named configuration will be instantly deleted.
To exit without deleting a saved configuration, rotate the jog wheel until *cancel* is displayed
and click.

Rename IO Config

This option allows a previously saved IO configuration to be renamed.
To rename an IO configuration highlight Rename IO Config and click.
Rotate the jog wheel to display the IO configuration to be renamed and click.
Enter the new configuration name as described above in the Save IO Config section.
To exit without renaming a configuration, rotate the jog wheel until *cancel* is displayed and
click.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
49