Unlocking The Front Panel; Appendix A: Performance Specifications - Omnia ONE Installation And Operation Manual

Rotate the jog wheel and click on "OK" to lock the front panel or "Cancel" to return to the Main Menu without
locking the front panel.
The factory default password is "omnia" (all lower case).
Changing the password is done using the "Enter Password" option in the Security section above.

Unlocking the Front Panel

To unlock the front panel, rotate the jog wheel to highlight "Password", click twice and <enter...> will be replaced
by the editing cursor.
Rotating the jog wheel clockwise will scroll through the capital letters of the English alphabet first. Rotating it
counter-clockwise will scroll through the numeric characters first, and then through the lower case English alphabet.
Once the desired character is found, click to accept that character, rotate the jog wheel one notch clockwise to
advance the cursor to the next position and click again to display the editing cursor.
Enter the next character of the password the same way.
When you have entered the last character of the password, do not click twice to display the editing cursor. Instead,
click only once to accept the final character and rotate the jog wheel to highlight the "OK" button.
Click on "OK" to accept. If the password was correct, the screen should display the Main Menu.

Appendix A: Performance Specifications

OmniaONE Multicast
As of January 2007 – Version 0.9 Software
OmniaONE Multicast - Use and Operation Manual – Version 0.90
52