Load Io Config - Omnia ONE Installation And Operation Manual

"select" mode will be cancelled. If this happens, simply rotate the knob counter-clockwise until "Name" is
highlighted and click to re-enter "select" mode.
When you reach the character you want to edit, click. This puts the cursor in "edit" mode. You can now
change that character by scrolling through the character list with the knob. When the desired character is
found, click. This will return the cursor to "select" mode and you can again turn the knob to select the next
character to edit.
-To delete a character... Select the character to be deleted, click, choose the " < " symbol and click again to
delete that character. Characters can only be deleted one at a time.
-To insert a character between 2 existing characters... Select the character just after where the new character
is to be inserted, click, choose the " ^ " symbol and click again. The new character appears. Now rotate the
knob to select the desired character for it and click to accept. (Note that this inserts a new character before
the one selected, and keeps the originally selected character intact as what it was before choosing "^")
When you are finished, simply rotate the knob clockwise with the cursor in "select" mode until the Save
button is highlighted and click to save the configuration preset.
-To cancel at any time without saving... With the cursor in "select" mode, rotate the knob clockwise until
Cancel is highlighted and click.

Load IO Config

This option allows you to select and load a previously saved IO configuration.
To load a saved IO configuration, highlight "Load IO Config" and click. Rotate the jog wheel until the
desired IO configuration is displayed and click. To exit without loading a configuration, rotate the jog
wheel until *cancel* is displayed and click.
Delete IO Config
This option allows a previously saved IO configuration to be deleted.
To delete an IO configuration highlight "Delete IO Config" and click. Rotate the jog wheel to display the
IO configuration to be deleted. Click the jog wheel and that named configuration will be instantly deleted.
To exit without deleting a saved configuration, rotate the jog wheel until *cancel* is displayed and click.
Rename IO Config
This option allows a previously saved IO configuration to be renamed.
To rename an IO configuration highlight "Rename IO Config" and click. Rotate the jog wheel to display
the IO configuration to be renamed and click. Enter the new configuration name as described above in the
Save IO Config section. To exit without renaming a configuration, rotate the jog wheel until *cancel* is
displayed and click.
<-Exit
Click on this option to return to the Main Menu.
56