Rs-232 Modem Connection (Db-9M) - Omnia ONE Installation And Operation Manual

RS-232 Modem Connection (DB-9M)

This DB9-male connector can be used to connect an external dialup modem for a bi-directional computer remote
1
control connection.
NOTE: This connector is for a remote control external modem connection only. Please see Appendix B for
information on how to use a terminal program along with an internal RS-232 connector for troubleshooting
purposes.
RS-232 Modem Port
NOTE: You must use a standard straight-through serial cable and not a null modem cable when connecting the RS-
232 connector of the Omnia and the external modem. Typically this would be 9-pin to 25-pin cable. (External
modems traditionally have 25 pin connectors in "DCE" configuration. The OmniaONE has a 9 pin in "DTE"
configuration, so the standard 9-pin to 25-pin cable will work).
1
The setup and operation of OmniaONE Remote Control is covered in detail in Appendix C.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
21