Table of Contents
Advertisement
3. Installation
3.13. Cellular Modems
The RX1512 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA
+, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front
plate of each module. The following cellular modem modules are available:
Module Order Code
W11
W12
W21
W22
W32
Table 3.10. Cellular Modem Modules
Figure 3.25. Single Port Cellular Modem: Antenna Connections
Figure 3.26. Dual Port Cellular Modem: Antenna Connections
If two or more antennas are to be installed, the antennas must be separated by a
minimum distance of 20 cm (7.9").
RuggedCom® RuggedBackbone™
Description
1 Port Cell Modem GSM,EDGE,HSPA+
2 Port Cell Modem GSM,EDGE,HSPA+
1 Port Cell Modem EVDO Rev.A Verizon Wireless
2 Port Cell Modem EVDO Rev.A Verizon Wireless
1 Port Cell Modem GSM,EDGE,HSPA+, 1 Port Cell Modem EVDO Rev.A Verizon Wireless
29
RX1512 Installation Guide Rev 105
Advertisement
Table of Contents
Need help?
Do you have a question about the RuggedBackbone RX1512 and is the answer not in the manual?
Questions and answers