Fiber Ethernet Ports; Sfp Module Removal; Mtrj; Available Fiber Connector Types - RuggedCom RuggedBackbone RX1512 Hardware Installation Manual

Rugged layer 3 switch and router

Hide thumbs Also See for RuggedBackbone RX1512:

Table of Contents

3. Installation

Figure 3.20. SFP module removal

3.12. Fiber Ethernet Ports

Depending on the order code of the product, the RuggedBackbone™ RX1512 can be equipped

with several different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections

of each port must be properly connected and matched for proper link establishment and operation.

The drawings in the following figures show a side and top view of each supported fiber optic

connector type to assist in identifying the proper cable connection orientation.

Table 3.9. Available Fiber Connector Types

RuggedCom® RuggedBackbone™

Figure 3.21. LC

Figure 3.23. SC

Figure 3.22. MTRJ

Figure 3.24. ST

RX1512 Installation Guide Rev 105

Table of Contents

Do you have a question about the RuggedBackbone RX1512 and is the answer not in the manual?