Table of Contents
Advertisement
2. RuggedBackbone™ Modules
2.1.1. Module Status LEDs
The front panel module status LEDs provide the following information:
LED
PM
LM 1 through 2
Table 2.1. Module Status LED Indications
2.2. Line Modules (LM)
The RuggedBackbone™ RX1512 supports two line modules in slots LM1 and LM2. Several types
of line modules may be ordered, depending on the type, speed, and number of Ethernet ports
required.
The following illustrations show the typical port configurations and connectors available for
RX1512 line modules. For complete information on the available line modules, refer to the
RuggedBackbone™ RX1512 data sheet.
Only one T1/E1 module may be used per router.
2.2.1. Ethernet - Copper
Figure 2.3. CG01: 2 × 10/100/1000TX RJ45
2.2.2. Ethernet - Fiber
Figure 2.5. FX**/FG**: 2 × 100FX/1000SX/1000LX LC
Figure 2.7. FX03: 2 × 100 FX MTRJ
Figure 2.9. FX**: 2 × 100FX SC
RuggedCom® RuggedBackbone™
Purpose
Indicates power supply status.
Indicates the line module status.
Figure 2.4. 6TX01: 6 × 10/100/1000TX RJ45
Figure 2.6. 4FX**: 4 × 100FC LC
Figure 2.8. 4FX03: 4 × 100FX MTRJ
Figure 2.10. FX**: 2 × 100FX ST
13
Description
I = Power supply is receiving input voltage.
O = Power supply is providing
output voltage to the RX1512.
Green = OK
Orange = Warning alert
Red = Configuration error
RX1512 Installation Guide Rev 105
Advertisement
Table of Contents
