Base Settings; Selecting The Base - Siemens Hicom cordless EM Gigaset 3000 Micro Operating Instructions Manual

Base settings

Selecting the base

If your handset is logged onto more than one base (sys-
1
tems ), you can set it to a particular base or "best base"
for automatic base changeover.
ð
<
ìã-!ý-!ååä)#-
=
<
ìã-!ýû
N
<
?!'!áåý
=
\
Note:
If you set
cally connected to the base with the best reception.
If you are located between two systems, for example,
and the handset switches continuously, you should set
it to a particular system.
The "ISDN Config" function should always be activated
as a basic setting.
1See also note on page 22
Press the menu key.
Scroll to
Confirm the selection.
Scroll to the required base,
for example,
Press the display key.
Scroll to
Confirm the selection.
The activated base is indicated by a
check mark
Use the display key to jump to the
next menu level up.
ì!-åýìã-!
ìã-!ý-!ååä)#-
ìã-!ýû
?!'!áå
symbol.
, the handset is always automati-
49
.
.
.