(For detergent and
■ Power supply
■ Wash capacity
■ Permissible water pressure : 100 - 800 kPa (1.0 - 8.0 kgf / cm
• The external hot water supply MUST NOT exceed 65°C
• Permissible cold water temperature : 4 - 25°C
• No further backflow protection required for connection to the water supply.
• The appearance and specifications may be varied without notice to lmprove the units quality.
• Specifications subject to change by manufacturer.
Inlet hose: Hot/Cold(2EA)
: Front loading washing machine
: 220 - 240 ~, 50 Hz
640 mm(D) 850 mm(H)
: 600 mm(W)
: 68 kg
: 2100 W
: 8 kg
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or a similarly qualified person in
order to avoid a hazard.
Drain pump filter
Lower cover cap