NEC N8100-1891F User Manual page 81

Nec express server express5800 series
Table of Contents

Advertisement

Chapter 2 Preparations
2.5-inch Hard Disk Drive model/air-cooling system
Product
Model name
name
N8103-128
RAID Controller (128 MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0 (x8))
RAID Controller
N8103-149
(512MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0(x8))
RAID Controller
N8103-150
(512MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
RAID Controller
N8103-151
(1GB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
1000BASE-T connection board (1ch)
N8104-138
(Card performance: PCI EXPRESS(x1))
1000BASE-T connection board (2ch)
N8104-132
(Card performance: PCI EXPRESS(x1))
1000BASE-T connection board (4ch)
N8104-133
(Card performance: PCI EXPRESS(x2))
N8117-01A
Additional RS-232C connector kit *2
 Can be installed
− Cannot be installed
*1 Lane:
Indicates the transfer performance (transfer bandwidth).
<e.g.> 1 lane = 2.5 Gbps (unidirectional), 4 lanes = 10 Gbps (unidirectional)
Socket: Indicates the connector size. A card up to the number of sockets can be connected.
<e.g.> x4socket = x1card, x4card can be installed. x8 card cannot be installed.
*2 The N8117-01A expansion RS-232C connector kit contains two types of cables. This server uses the RS-232C cable (B).
The depth of mountable boards is up to 167.6 mm (MD2).
For details of functions of each card, refer to the technical guide.
The card performance described in the parentheses after the Product name indicates the maximum operation performance
of the card.
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that of the PCI slot.
About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming and bonding with the standard network and the
following LAN cards:
N8104-132, N8104-133, and N8104-138
PCI EXPRESS
2.0
PCI#1
PCI#2
PCI slot performance
*1
X4lane
X4lane
Slot size
X8
PCI card type
*1
socket
socket
Available card size
Up to 167.6 mm (MD)
Express5800/GT110e-S User's Guide
PCI
3.0
PCI#3
PCI#4
32-bit/
X16lane
33 MHz
Low Profile
x8
X16
5 V
socket
Connects with internal drives
Can mount internal battery N8103-141 (450 mm
cable)
Connects with internal drives made by LSI
Technology
Can mount internal battery N8103-141.
For adding LAN
Teaming (AFT/SFT/ALB) and bonding with
N8104-132/133/138
supported. Up to 2 teams per system. Up to 2
ports per team.
For additional serial (RS-232C) port
1. Installing Internal Optional Devices
Remarks
and
on-board
LAN
is
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-1892fN8100-1894fExpress5800/gt110e-sExp281a

Table of Contents