Power Led ( ); Status Led ( ) - NEC N8100-1891F User Manual

Nec express server express5800 series
Table of Contents

Advertisement

Chapter 1 General Description
4.5.1
POWER LED (
POWER LED lights amber during initialization of the system. You can power on the server after the amber
POWER LED goes off.
POWER LED lights green while the server is on.
4.5.2
STATUS LED (
While hardware is operating normally, STATUS LED lights green. STATUS LED is off or lights/flashes
amber if there is a problem with hardware.
The following table lists STATUS LED patterns, their explanation and solution.
STATUS LED pattern
On (green)
Flashing (green)
Off
On (amber)
)
)
Tips
Refer to the system event log (SEL) by using NEC ESMPRO or the offline
maintenance utility to view the cause of failure.
Explanation
The server is operating normally.
The server is operating with the memory in degraded
state.
An uncorrectable memory error has often occurred.
The power is off.
POST is in progress.
A CPU error occurred.
Abnormal CPU temperature is detected.
Watchdog timer expired.
An uncorrectable error in memory is detected.
A PCI system error occurred
A PCI parity error occurred
A PCI bus error occurred.
Memory dump is being requested.
(e.g. when DUMP switch NMI is pressed)
Note It remains green if the dump is caused by
software.
A temperature alarm was detected.
A voltage alarm was detected.
A CPU temperature alarm was detected.
SMI timeout is detected
Express5800/GT110e-S User's Guide
4. Names and Functions of Parts
Solution
Identify the device in degraded state by using the BIOS
setup utility SETUP, and replace it as soon as possible.
Turn on the server.
The STATUS LED will turn green after POST completes.
Turn the power off and then turn it on. If the POST
screen displays any error message, take notes of the
message, and contact your sales representative.
Wait until the memory dump is completed.
Check the internal fan for dusts. Also check if the fan
unit is properly connected.
If the LED indication does not change when the fans are
normal, contact your sales representative.
Contact your sales representative.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-1892fN8100-1894fExpress5800/gt110e-sExp281a

Table of Contents