Maximum Supported Memory Size; Installation Order - NEC N8100-1891F User Manual

Chapter 2 Preparations

Maximum supported memory size

1.7.1
The maximum available memory size on the server depends on the architecture (x86 architecture) and OS
specs.
A list of maximum memory sizes
Windows Server 2003 R2 Standard Edition
Windows Server 2008 Standard
Windows Server 2008 R2 Foundation
Windows Server 2003 R2 Standard x64 Edition
Windows Server 2008 Standard (x64)
Windows Server 2008 R2 Standard (x64)
Windows Server 2003 R2 Enterprise Edition
Windows Server 2008 Enterprise x86 Edition
Windows Server 2003 R2 Enterprise x64
Edition
Windows Server 2008 Enterprise (x64)
Windows Server 2008 R2 Enterprise (x64)

Installation order

1.7.2
Install DIMMs one by one in order of increasing memory size into slots in the order of DIMM#1, DIMM#2,
DIMM#3, and DIMM#4.
However, if you want to run the server in Dual Channel mode, observe the following when installing the
DIMMs:
• Install DIMMs in pairs
• The two DIMMs installed together must be of the same specifications and memory size.
• Install the pairs as DIMM#1 and DIMM#2, or DIMM#3 and DIMM#4 (the installation order between the
pairs does not matter.)
Installation examples
Dual Channel
Example
Memory mode
1 Runs
2 Runs
3 Does not run
4 Does not run
52
The maximum memory size
OS
4 GB
8 GB
32 GB
64 GB
1 TB
2 TB
DIMM#1
2 GB DIMM 2 GB DIMM
(Standard)
2 GB DIMM 2 GB DIMM
(Standard)
2 GB DIMM 2 GB DIMM
(Standard)
2 GB DIMM 2 GB DIMM
(Standard)
Express5800/GT110e-S User's Guide
1. Installing Internal Optional Devices
supported on each OS
4 GB (If using HW-DEP function)
* Default factory settings
About 3.3 GB (If not using
HW-DEP function)
Note: When Execute Disable Bit
8 GB
32 GB
DIMM#2 DIMM#3
Not installed
2 GB DIMM
2 GB DIMM
Not installed
The maximum memory size
supported on the server
(XD Bit) is set to Disabled in
BIOS SETUP.
DIMM#4
Not installed
2 GB DIMM
Not installed
2GB DIMM