Table of Contents
Advertisement
Chapter 2 Preparations
Installing a RAID Controller
Install the RAID Controller into the PCI slot #1 of the server.
Connecting the battery control cable
Referring to the image below, connect the battery control cable into the battery pack. Check the orientation of
the connector and connect the cable straight into the connector.
Make sure the connector is oriented correctly by checking the following two points.
Facing up the battery plate
Blue line on
the left
Important
When installing or removing an extra battery, pay special attention not to apply
excessive pressure on the bracket tab. Otherwise, the part may break.
Express5800/GT110e-S User's Guide
1. Installing Internal Optional Devices
RAID Controller
63
Advertisement
Table of Contents
