Table of Contents
Advertisement
12.7 Misc. Settings
12.7.1 Automatic Start
If Automatic Start is enabled, the AMC will be started automatically whenever the phone
is switched on.
12.7.2 International Prefix
In this field you can specify with which characters a leading plus "+" should be replaced
whenever it is signaled in DTMF.
12.7.3 Maximum Number Length
The Maximum Number Length determines after how many digits (of a phone number)
the AMC will send DTMF (in cellular networks). In most cases, this depends on the first
network device on the way (gateways and trunks in many countries support up to 19
sometimes even 21 digits). To ensure the correct functionality, simply set this value to
"0".
Attention
This setting can be used to expedite the dialing of Call-through calls, basically
getting it to the same level as with operator supported dialing (OSD) functions en-
abled. This feature will attach the destination number to the Call-through number.
It does not require a data connection. You should however be aware that it only
works in countries without fixed number lengths and if you have a trunk with your
carrier that allows passing the additional digits.
12.7.4 HTTPS Port
If a port is configured here and if HTTP(S) has been activated on your AMCC, data con-
nections will be established automatically whenever necessary(for Callbacks, to access
the Corporate Contacts etc.).
amc-3_android_ug_en_2012-10
12 Administrator Settings
49
Advertisement
Table of Contents
